Siemens SITRANS F Series Quick Start Manual page 9

Hide thumbs Also See for SITRANS F Series:

AC connection

Power: 100 to 240 VAC +10/-15%, 47 to 63 Hz

6. Close and latch power supply terminal protection cover.

7. Tighten cable gland.

Current output/HART (channel 1)

1. Remove cap and ferrule from cable gland and slide onto cable.

2. Push cable through open gland and cable path.

3. Restore ferrule and tighten cap to lightly hold cable in place.

4. Signal cable screen is folded back over outer sheath and grounded beneath cable clamp.

5. Connect wires to terminals using wiring tool.

Active current output

6. Tighten cable gland.

Note

Active or passive current output is preselected at ordering.

Note

Load

Current output (channel 1): < 500 Ω (HART ≥ 230 Ω)

SITRANS FCT030 transmitter

A5E03922778-006, 12/2013

⑤

④

Ca+

DC connection

Power: 20 to 27 VDC +10/-10%

Passive current output

⑥

Cp-

⑤

Sitrans fct030