Siemens SITRANS F Series Quick Start Manual page 14

Navigating the views
Browse the views and menu items using the control buttons as follows:
Table 5-1 Measurement view
Key Function
No functionality
Go to the previous menu in the operation view
Go to the next menu in the operation view
Enter the navigation view
Table 5-2 Parameter edit view
Key Function
Select the next left position.
If the most left position is selected, exit the parameter edit view without confirming the changes. Keep
pressing the key to jump to the most left position.
Change the selected number/character.
Numeric characters: increase the number by one (for example from 7 to 8)
ASCII characters: select the previous character in the alphabet.
Change the selected number/character.
Numeric characters: decrease the number by one (for example from 8 to 7)
ASCII characters: select the next character in the alphabet.
Select the next right position.
If most right position is selected, confirm the change and exit the parameter edit view. Keep pressing the
key to jump to the most right position.
Commissioning
Initial start up
The first time the device is powered up, you will be prompted to set the language. The device always starts up showing
Language in English. When the language has been set, you will be prompted to set the date and time. After
confirming/changing the date and time you will be asked if you want to start the Quick Commissioning wizard. If you choose
Yes (recommended), the Quick Commissioning wizard will start. If you choose No, you accept the default values of the
device, and the next LUI view will be the operation view 1. Subsequent changes to parameter values require a user
password. Refer to the Operating Instructions for details.
14
SITRANS FCT030 transmitter
A5E03922778-006, 12/2013