Inputs and outputs (channels 2 to 4)
1. Remove cap and ferrule from cable gland and slide onto cable.
2. Push cable through open gland and cable path.
3. Restore ferrule and tighten cap to lightly hold cable in place.
4. Fold signal cable screen back over outer sheath and ground beneath cable clamp.
5. Connect wires to terminals using wiring tool.
Active current output
Termination example for channel 3
6. Tighten cable gland.
10
⑫
IO[3] (common)
⑪
IO[3]+ (active)
Passive current output
⑬
IO[3]- (passive)
⑫
IO[3] (common)
SITRANS FCT030 transmitter
A5E03922778-006, 12/2013