Remote Mounting - Siemens SITRANS F Series Quick Start Manual

With terminal housing
● SITRANS FCS400 sensor
● SITRANS FCT030 transmitter with terminal housing
assembled
● Mounting bracket and cushion pad
● Sensor cable
● Packet of cable glands
● Quick Start guide
● CD containing software, certificates and device manuals
Note
Supplementary information
Supplementary product and production specific certificates are included on the SensorFlash
socket.
Note
Scope of delivery may vary, depending on version and add-ons. The contents list in the product package lists all included
parts.
Note
Sensor installation
The installation of the FCS400 sensor is described in the SITRANS FCS400 Quick Start (A5E03649755).

Remote mounting

Wall mounting
1. Prepare holes with aid of mounting bracket.
2. Fasten mounting bracket with cushion pad to wall (torque 10 Nm).
Pipe mounting
1. Mount mounting bracket with cushion pad on pipe using fastening brackets/U-bolts and supplied pipe adaptor. Note: U-
bolts and other miscellaneous hardware are not supplied with the flowmeter.
2. Tighten nuts (torque 10 Nm).
2
SD card in the transmitter
®
SITRANS FCT030 transmitter
A5E03922778-006, 12/2013