Infortrend EonStor DS 3000 Series Hardware Manual page 70

Checking the power status
Once the system is on, no LEDs should light up in red or amber, nor should you hear an alarm from the
system. Start verifying the system status via the following interfaces:
• LCD panel LEDs
Number
When the system starts up, the LCD screen displays the following order:
11
11
11
Initializing...
Please Wait...
Power On Self Test
Please Wait...
Power on
Init Completed...
ES80xx
ES80xx
xGB RAM, Wait...
ES80xx
ES80xx x
Ready
NOTE: When turning ON the DS system, wait for the LCD screen to display READY or No Host LUN.
EonStor DS 3000 Series Hardware Manual
Name Status
Power OFF
Host Busy ON
Attention OFF
This displays when the PSUs are turned on.
The system is performing a POST (power on self-test).
The system POST is completed.
The system is accessing various interfaces.
The system is verifying the installed memory.
The system is now ready. You can start configuring the
system.
The system is ready for I/O operation.
2-43