Miele CS 1013-1 Operating And Installation Instructions page 9

Technical safety

Unauthorised installation, maintenance and repairs can cause
considerable danger for the user. Installation, maintenance and
repairs must only be carried out by a Miele authorised technician.

Do not use a damaged appliance. It could be dangerous. Check
the hob for visible signs of damage.

Reliable and safe operation of this hob can only be assured if it
has been connected to the mains electricity supply.

The electrical safety of this hob can only be guaranteed when
correctly earthed. It is essential that this standard safety requirement
is met. If in any doubt please have the electrical installation tested by
a registered electrical worker.

To avoid the risk of damage to the hob, make sure that the
connection data on the data plate (voltage and frequency) match the
mains electricity supply before connecting it to the mains.
Consult a registered electrical worker if in doubt.

Do not connect the hob to the mains electrical supply by a multi-
socket adapter or extension lead. These are a fire hazard and do not
guarantee the required safety of the appliance.

For safety reasons, this hob may only be used after it has been
built in.

This hob must not be used in a non-stationary location (e.g. on a
ship).

Never open the casing of the hob.
Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.

While the hob is under warranty, repairs should only be
undertaken by a Miele authorised service technician. Otherwise the
warranty is invalidated.
Warning and Safety instructions
9