Installation
Connecting the CombiSet
Connect the CombiSet to the
electricity and gas supplies (see "Gas
connection").
Checking operation
After installation, ignite all burners to
check that they are operating
correctly:
– The flame must not go out on the
lowest setting, or when the control is
turned quickly from the highest to the
lowest setting.
– On the highest setting, the flame
must have a distinctive and visible
core.
42
Removing the CombiSet
If the CombiSet can be accessed
from below, push it out from below.
Push the rear side out first.
If the CombiSet is not accessible
from below, take hold of the
appliance with both hands at the
back, pull it forwards, then lift it up
and out.