Electrical connection
Disconnecting from the mains
Danger of electric shock.
After disconnection, ensure the
appliance cannot be switched back
on by mistake.
To disconnect the appliance from the
mains power supply, do one of the
following depending on installation:
Safety fuses
Completely remove fuses
Automatic circuit breakers
Press the (red) button until the middle
(black) button springs out.
Built-in circuit breakers
Circuit breakers, type B or C: switch
the on-off switch from 1 (on) to 0 (off).
Residual current device (RCD)
Switch the main switch from 1 (on) to
0 (off) or press the test button.
44
Replacing the mains cable
Danger of electric shock.
The mains connection cable must be
replaced by a registered electrical
worker in accordance with current
local safety regulations.
If the mains cable needs to be replaced
it must be replaced with a special
connection cable, type H 05 VV-F (PVC-
insulated), available from Miele.
The connection data is quoted on the
data plate.