Miele CS 1013-1 Operating And Installation Instructions page 46

Gas connection
Depending on country of destination
this appliance is set up for connection
to Natural gas, Liquefied Petroleum gas
(LPG) or Town gas (TG). See adhesive
label on the appliance.
Depending on country, a set of jets for
conversion to an alternative type of gas
may be included with the hob. Please
contact your supplier or Miele for the
appropriate conversion jets if
necessary. Conversion to another type
of gas is described under "Conversion
to another type of gas".
Appliances set up for connection to
town gas have a gas governor included.
Connecting the hob
The hob is supplied with a conical ¹/₂"
gas connection point for connection to
one of the following:
– Rigid connection with isolation valve
– Flexible connection, maximum length
2000 mm.
Unsuitable sealants may not be leak-
proof.
Connections must be sealed using
appropriate sealant.
 After installation, turn on the gas
supply and use soap solution to
check for gas leakage.
Never use a naked flame!
46

According to the Gas Safety
(Registration of Gas Installers and
Gas Contractors) Regulations, any
gas installation work including the
installation of appliances and
connecting tubing, must be
undertaken by a registered gas
installer who is registered for that
appropriate class and is employed
by a registered gas contractor.
c Connection R ½"
d 90° bend