Miele CS 1013-1 Operating And Installation Instructions page 13


The pan support supplied with the appliance must always be
used. Never place a pan on the burner itself.

Replace the pan supports carefully to avoid scratching the surface
of the hob.

Do not use or store flammable materials near this hob.

Remove splashes of fat and other food debris from the surface of
the hob as soon as possible. These are a fire hazard.

Avoid allowing liquids or foods containing salt to spill onto the
hob. If salty foods or liquids do get on the hob, they should be
removed as soon as possible to avoid the risk of corrosion.

The use of the hob creates heat, moisture and combustion
products in the room where it is installed. Make sure that the
appliance is installed in a location with sufficient ventilation. Natural
ventilation openings should not be blocked. Alternatively, a
mechanical ventilation device (e.g. a cooker hood) can be installed.

Prolonged intensive use of the hob may require additional
ventilation of the room, e.g., by opening a window, or by operating
the cooker hood on a higher setting.

Do not use roasting dishes, pans or grilling stones that are large
enough to cover more than one burner. The resulting build-up of
heat could damage the hob.

If the hob has not been used for a longer period of time, it should
be thoroughly cleaned before it is used again. It is also advisable to
have it tested by registered gas installer for safety. This should be
done at regular intervals.

Where several CombiSets are installed side by side:
Hot objects can damage the seal of the cover strip between the
appliances. Do not place hot pans near or on the cover strip.
Warning and Safety instructions
13