Set Up The Weeder - Primera FX1000 Operator's Manual

Section 3.2 Set Up the Weeder
1. Push the Nip Lever into the "Nip Open" position.
2. Feed the media OVER the first guide roller and UNDER the second guide roller.
3. Continue feeding the media through the nip point.
4. Once you reach the peel roller, peel the matrix from the liner.
Peel
Roller
5. Place an empty core on the Matrix mandrel and tighten the core engagement knob.
6. Pull the matrix from the liner and attach it to the Weeder. Manually turn the mandrel
one full revolution.
First Guide Roller
Matrix
Nip Lever
Second Guide Roller
Slitter Station
10