Section 1: Warnings, Cautions and Notes
Thank you for purchasing the FX1000 Matrix Removal System. Please read the following
Warnings, Cautions and Notes before operating your FX1000.
Note: Notes are used to notify of installation, operation, or maintenance information that is
important but not safety related. Notes will be found throughout this manual.
Caution: Caution is used to indicate the presence of a hazard, which if ignored may result in
damage to the unit.
Warning: Warning means that a potential safety hazard exists and indicates procedures that
must be followed exactly to avoid serious personal injury.
Warnings
•
Do not operate the FX1000 while wearing loose fitting clothing or neck ties. Serious
injury may result. If clothing or fingers are caught in the rollers, immediately press the
STOP button on the front of the unit.
•
Keep your hands away from the FX1000 at all times while it is running. The electric
motors in the FX1000 are extremely powerful and are capable of crushing fingers at the
nip point in the paper path. The nip point is where the paper is compressed so it can be
pulled or pushed through printer. If fingers are caught in the nip point, press the stop
button immediately and open the nip points by pushing the levers to the right.
•
To prevent fire or shock hazard, do not expose the unit to rain or moisture. To reduce
the risk of electric shock, do not remove exterior panels. No user-serviceable parts are
inside. Refer to qualified service personnel. Operate the unit with only proper electrical
specifications as labeled on the unit and the AC adapter.
Caution
•
Do not use media that is wider than specified in the specifications section of this manual.
4