Unpack And Assemble - Primera FX1000 Operator's Manual

Section 2.2: Unpack and Assemble
1. Disassemble the top and sides of the crate by removing the screws from the red
dots. Remove the supply box and the input mandrel box.
2. Using the yellow nylon lifting straps, lift the FX1000 out of the crate and onto the
floor. Using an M5 Allen wrench remove the straps and replace the bolts. The straps
are not useful for lifting to heights above the knees.
3. Lift the FX1000 on to a sturdy table or bench capable of holding at least 250 lbs (114
Kg). You will need 4 people, one at each corner, to comfortably lift the FX1000 from
the floor onto a table. The back right corner has the most weight.
1. Lift Here
2. Lift Here
3. Lift Here
4. Lift Here
6