Table of Contents
Advertisement
3. Loosen the thumbscrew on the blade housings you intend to engage. For optimal
safety, it is recommended to use a pliers to loosen the blade housing thumb and move
them into the engaged position.
View from Back of unit
4. Pull the thumbscrew toward you to engage the slitter blade. The thumbscrew moves
inside a curved slot.
Pull
5. Tighten the thumbscrew once the slitter blade is engaged.
6. Start with the slitter blade furthest from you and repeat steps 2, 3 and 4 for each.
7. Once you have engaged the blades you want to use close the slitter station.
Do NOT push the cover all the way closed! Let it rest on the spring
loaded latches for now. The blades will not cut the media in this position.
Note: Before deciding which
blades to engage make sure
that the blade can actually be
moved to the intended
position. Each blade housing
has a limited range of
movement. If you cannot
move the blade to the
intended position you will
need to choose a different
blade housing.
Slitter blade engaged
15
Advertisement
Table of Contents
