Table of Contents
Advertisement
MAC Auth settings
Excluded Ports
© 2018 Westermo Teleindustri AB
Enable MAC based authentication by selecting a
configuration. See
authentication configurations.
The ports on your switch is grouped as on the actual
hardware, in slots. Check the box underneath the
port label to exclude that port from access control.
An excluded port will be open and does not require
authentication. This is suited for uplink ports, trunk
ports and for connecting servers. The default for
ports is unchecked, thus enabling port access con-
trol/authentication. Check-boxes can be shown as
disabled, like port 1 and 2 in the above picture. This
means that the current VLAN does not have this port
as a member and is therefore not relevant for exclu-
sion. See
section 15.3.1
between ports and VLANs.
Westermo OS Management Guide
Continued from previous page
section 9.2.20
for managing MAC
for managing the relations
Version 4.24.1-0
387
Advertisement
Table of Contents
