Westermo RedFox Series Management Manual page 274

Listing information on a all ports of a specific type
Example
example:/config/#> show ports dsl
xDSL -------------------------------------------- Priority ---- Limit - Default
Port Ena Mode Filter Encap PVC
===============================================================================
DSL 1 YES adsl
===============================================================================
example:/config/#>
10.3.3 Port enabling and disabling
Syntax [no] enable
Context Ethernet Port Configuration
figuration and
Usage Use "enable" to enable and "no enable" disable a port.
Use "show enable" to show whether the port is enabled or disabled.
Default values Ports are enabled by default.
10.3.4 Speed and duplex setting
Syntax [no] speed-duplex <auto|10-half|10-full|100-half|100-full|
1000-half|1000-full>
Context Ethernet Port Configuration
Usage Set port speed and duplex modes. "auto" means auto-negotiate, other
modes are static configurations specifying 10, 100 or 1000 Mbit/s, and half
or full duplex.
"no speed-duplex" will revert to default configuration for the speed-duplex
setting, i.e., "speed-duplex auto".
Use "show speed-duplex" to show the port's speed/duplex setting.
Default values auto
274
Annex Alarm
YES llc 8/35
xDSL Port Configuration
Westermo OS Management Guide
Mode Level
A NO tag 0
context (also available in
for products with DSL ports)
context.
© 2018 Westermo Teleindustri AB
Version 4.24.1-0
In | Out Vid
None None Auto
SHDSL Port Con-