Operation; Before Switching On For The First Time - Silvercrest SHSK 3.7 A1 Operating Instructions Manual

__NAS280611_Haarschneider_kompakt_B4.book Seite 12 Dienstag, 8. November 2016 8:31 20

6. Operation

6.1 Before switching on for the first time

CAUTION:
After unpacking, there may still be oil residues on the cutting
blades of the blade unit 1. Remove these with an absorbent,
lint-free cloth before using the device for the first time.
Regardless of the charging state of the battery, the compact hair
trimmer can always be used in mains operation.
1. Before switching to mains operation, ensure that the device
is switched off.
2. Connect the power unit 6 to the connector 5 of the device.
3. Insert the power unit 6 into a readily accessible wall socket
whose voltage matches the voltage stated on the rating
plate.
4. Switch on the device with the on/off switch 3.
6.2 Pushing on/removing the comb
attachments
WARNING! Risk of injury!
Switch off the device before replacing or changing one of
the comb attachments 7.
The comb attachments 7 are marked on the underside with the
cutting length:
(1.5/2.0/2.5/3.0/4.5/6.0/9.0/12.0/15.0 mm)
12
GB