Operation; Changing The Attachments; Beard Trimming - Silvercrest SHBS 800 A1 Operation And Safety Notes

Operation

Changing the attachments

Precision attachment
The precision attachment
for short hair. Carefully attach the precision attachment
product (see Fig. C). Make sure that both of the recesses on the
precision attachment
locking mechanisms on both sides of the cutting unit
To adjust the precision attachment
and upwards using both thumbs (see Fig. C).
To remove the precision attachment
both thumbs (see Fig. C).
Comb attachment
The comb attachment
tach the comb attachment
sure that both of the recesses on the comb attachment
place properly in the lateral locking mechanisms on both sides of
the cutting unit
To adjust the comb attachment
front and the back of the attachment with your thumb and
forefinger (see Fig. D).
To remove the comb attachment
both thumbs (see Fig. D).

Beard trimming

Attach the precision attachment
described in the chapter "Changing the attachments".
:
15
is intended for trimming beards and
15
lock into place properly in the lateral
15
:
16
is intended for cutting hair. Carefully at-
16
to the product (see Fig. D). Make
16
.
1
16
15
, press and slide it forwards
15
, pushing it upwards using
15
, press the release button on the
, pushing it upwards using
16
to the switched-off product as
to the
15
.
1
lock into
16
GB/IE/NI 21