Standard Accessories - Teledyne HVD3102 Operator's Manual

HVD3102 and HVD3106 High-Voltage Differential Probes

Standard Accessories

All accessories feature a 4 mm Banana (female) connector to accept most Banana plugs.
Spade Terminals, PK-HVA-05, QTY 2 (1 ea. red/black). Designed to connect to
terminal strips, posts and screws, the overall length is 63 mm (2.48 inches).
Insulated, 1000 V, CAT III.
Safety Alligator Clips, PK-HVA-01, QTY 2 (1 ea. red/black). Designed to
reliably grip large components, such as bus bars and large bolts, the overall
length is 92.8 mm (3.65 inches) and the jaw opens to 32 mm (1.26 inch).
Only the lower jaw is conducive; the top jaw is insulating plastic. Insulated,
1000 V, CAT III.
Plunger Hook Clips, PK-HVA-03, QTY 2 (1 ea. red/black). Designed with a flexible stem to
access deep targets in dense environments and a 4.5 mm (0.177 inch) hook to attach to wire
leaded parts. The overall length is 157.6 mm (6.20 inches). Insulated, 1000 V, CAT II.
6
WARNING. To avoid injury or death due to electric shock, do not
handle probe input leads connected to the Spade Terminals while
they are connected to a voltage source. Do not use Spade
Terminals as hand-held accessories; they are meant to be used as
a permanent installation in a test set up.
923278-00