Teledyne HVG-2020A Quick Start Manual

Warranty Policy
See the company website for warranty information at:
http://www.teledyne-hi.com/terms&conditions.htm
Return Policy
See the company website for return information at:
http://www.teledyne-hi.com/terms&conditions.htm
Any product returned for either warranty or non-warranty repair must have been
issued a Return Material Authorization (RMA) form.
RMA Forms may be obtained from the Information section of the Hastings
Instruments website:
http://www.teledyne-hi.com/inforeq.htm
WARNING: Contaminated parts can be detrimental to health and environment.
Ensure instruments are free of hazardous contamination prior to shipment.
Company contact information
TELEDYNE HASTINGS INSTRUMENTS
804 NEWCOMBE AVENUE
HAMPTON, VIRGINIA 23669 U.S.A.
ATTENTION: REPAIR DEPARTMENT
TELEPHONE (757) 723-6531
1-800-950-2468
FAX (757) 723-3925
E MAIL mailto:hastings_service@teledyne.com
INTERNET ADDRESS http://www.teledyne-hi.com
HVG-2020A
QUICK START GUIDE
Visit www.teledyne-hi.com for WEEE disposal guidance
I S O 9 0 0 1
C E R T I F I E D
Important Safety, Compliance and Warranty Information
WARNING: Read the manual before product use.
http://www.teledyne-hi.com/resource-center/manuals/vacuum-manuals
CAUTION: There are no operator serviceable parts or adjustments inside the
product. Do not disassemble or attempt to service this product. If product is
not operating properly, call Teledyne Hastings service.
CAUTION: If this equipment is used in a manner other than that specified, the
protection provided by the equipment may be impaired.
NOTICE: The instrument is designed for INDOOR use only and non-condensing
environments. Also, the ambient temperature and process gas temperature
must be such that the gauge temperature remains between -20 and 70°C.
www.teledyne-hi.com