General Titanium Series Instruction Manual page 14

USING YOUR LASER (continued)
Charging the rechargeable battery pack
• Insert the charger into one of the two charging
ports. The charging ports are located on the
battery pack and underneath the control panel.
Progress will be shown by the power indicator
display on the charger as below:
Red (flashing) = Charger and battery
are not connected.
Red (constant) = Battery is charging
Green (constant) = Battery is charged
• Charging time is approximately 5 hours for a
depleted battery.
The battery pack does not need to be inserted
i
in the laser whilst charging via the port on the
battery pack.
14
Removing and inserting the rechargeable battery
pack
• Loosen the battery thumb screw on the base of
the instrument and remove the battery pack.
• Insert the battery pack, ensuring the metal pins are
aligned. Tighten the battery thumb screw.
WARNING: Do not attempt to disassemble the
!
battery pack.
i • The unit can also run on alkaline batteries. The
alkaline battery tray is an optional extra which
can be purchased from your retailer.