Table of Contents
Advertisement
the channel's setup conditions including coupling, gain, and offset. They are
used also to select multiple grids, to automatically set the gain (Find Scale), or to
automatically display a zoom of the signal. Press twice to toggle the trace on and
off.
Zoom Control
Knobs:
Automatically displays magnified views of up to four signal inputs on multiple
Q
Z
UICK
OOM
grids. With four input signals, the signals are displayed along with four zoom
traces, each on its own grid. This button turns off all other traces.
(toggle switch)
Adjusts the horizontal position of a zoom trace on the display. The zoom region
is highlighted in color on the source trace. Unlike Delay, the position is not
P
OSITION
calibrated to the trigger position.
Adjusts the horizontal zoom (magnification factor) of the selected zoom trace.
Z
OOM
Adjusts the vertical position of the selected zoom trace on the display. Unlike
P
Offset, the position is not calibrated to the 0 V reference.
OSITION
Adjusts the vertical zoom (magnification factor) of the selected zoom trace on
Z
the display.
OOM
Special
Features
Knobs &
Buttons:
Automatically sets the scope's horizontal timebase (acquisition system), vertical
Auto Setup
gain and offset, as well as trigger conditions, to display a wide variety of signals.
These knobs control the placement of the cursors on your waveform. Cursors
C
URSORS
are activated by selecting Cursors from the menu bar.
WR6A-GS-E Rev B
G
S
E T T I N G
ISSUED: July 2005
M
T A R T E D
A N U A L
35
Advertisement
Table of Contents
