Assembly - Grizzly G0850 Owner's Manual

Assembly

The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
To assemble machine:
1.
Attach (3) 3" non-locking swivel casters to
base stand using (12)
" flat washers (see Figure 10).
and (12) ⁄
1
4
Tip: Applying thread-locking fluid to bolt
threads ensures life-long tight mounting.
Figure 10. Non-locking swivel casters installed
on base stand.
2.
Attach (2) 3" locking swivel casters to base
stand using (8) ⁄ "-20 x
1
4
" flat washers (see Figure 11).
⁄
1
4
Figure 11. Locking swivel casters installed on
base stand.
-16-
⁄ "-20 x ⁄ " hex bolts
1 3
4 4
x 12
⁄ " hex bolts and (8)
3
4
x 8
3. Position lower front legs in base stand with
flanges facing inside and two threaded bolt
holes above (see Figure 12).
Bolt
Holes
Above
Flange
FRONT
Figure 12. Left and right lower front legs
positioned properly in base stand.
4. Secure left and right lower front legs to base
stand with (2) ⁄ "-18 x
5
16
⁄ " fender washers per leg (see Figure 13).
5
16
Finger-tighten for now.
Right Leg
Left Leg
x 4
Figure 13. Left and right lower front legs
attached to base stand.
Model G0850 (Mfd. Since 01/19)
Right Leg
Left Leg
Flanges
Face
Inside
⁄ " hex bolts and (2)
3
4