Assembly - Grizzly T28798 Owner's Manual

Assembly

The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
Note: Do not destroy packaging until after the Test
Run.
To assemble dust collector:
1.
Attach casters to bottom of dust collector
using (16) ⁄ "-18 x
5
16
in Figure 5.
x 16
Figure 5. Attaching casters to bottom of dust
collector.
Model T28798 (Mfd. Since 12/18)
⁄ " flange bolts, as shown
1
2
2. Attach dust port to side of dust collector with
(4) ⁄ "-18 x ⁄ " button head cap screws (see
5 1
16 2
Figure 6).
x 4
Figure 6. Attaching dust port.
3. Attach Y-inlet to dust port with (1) #10-24 x
⁄ " flange screw (see Figure 7).
3
8
Y-Inlet
Figure 7. Attaching Y-inlet to dust port.
Dust
Port
x 1
-15-