Getting Started; Sos Function - Globalsat TR-151A Quick Start Manual

Vehicle/asset tracker
Hide thumbs Also See for TR-151A:
Table of Contents

Advertisement

Getting Started

SOS function

Step 1
Power on
Step 2
Press SOS button for 3
seconds.
If GPS has fixed its position,
you will receive a message in
the format shown on right
indicating the position is
fixed. If the position can not
be fixed within 3 minutes,
you will also receive a "GPS
not fixed" message.
(Note 1): If error occurs during power on stage, the red status LED will flash 4 times quickly and then shut down.
This might result from:
Configuration file error or setup not completed.
Solution
(Note 2): If error occurs during power on stage, the GSM blue LED continually flashes once per second. This might
result from:
Need to enter SIM PIN.
Solution
again.
TR-151
Please repeat the setup processes described above.
Please turn off the power, disable the SIM PIN entry function by hand phone and restart it
Red Status LED will flash 2 times.
GSM LED begins to flash once per
second. After TR-151 finish
registration process in a few
second, the LED will flash once per
3 second.
(Note 1) (Note 2)
GPS begins to get position fixed.
GPS LED will be on.
Red Status LED will flash 3 times.
Position report
Name
2006/9/15 10:20:39
N2459.8915,E12129.2186
GPS fixed
page 7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tr-151e

Table of Contents