1. Manuals
  2. Brands
  3. AGP Manuals
  4. Power Tool
  5. EB24R
  6. Instruction manual

AGP EB24R Instruction Manual

Electric beveler
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Instruction manual

For your personal safety,
READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
Warning:
Only tools equipped with over load protection, when motor has been cut off due to over
load, always switch on machine with no load for at least 3 minutes to reduce temperature
before switch on again to avoid burn out to the motor.

Advertisement

Table of Contents
loading

Related Manuals for AGP EB24R

Summary of Contents for AGP EB24R

  • Page 1: Instruction Manual

    Instruction manual For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Warning: Only tools equipped with over load protection, when motor has been cut off due to over load, always switch on machine with no load for at least 3 minutes to reduce temperature before switch on again to avoid burn out to the motor.
  • Page 2 Handle Side Handle On / Off Switch Plate Facing-off: 0 Deg. Depth adjustor knob AC Induction Motor Front Handle Depth Lock Screw Angular Adjustment Plate Beveling Screw Roller Angular Adjustment from 0-60 Deg. Pipe Beveling 12 carbide insert tool holder 1100W AC Induction Motor Model Power Input...

  • Page 3: General Safety Instructions

    GENERAL SAFETY INSTRUCTIONS When operating a power tool outdoors, use an extension cord suitable for outdoor use. WARNING! Read all safety warnings and Use of a cord suitable for outdoor use reduces all instructions. Failure to follow the the risk of electric shock. I f o p e rat i n g a p owe r to o l i n a d a m p warnings and instructions may result in location is unavoidable, use an ear th...
  • Page 4 ensure these are connected and properly used. 5) SERVICE Use of dust collection can reduce dust-related Have your power tool serviced by a qualified hazards. repair person using only identical replacement parts. This will ensure that the safety of the power 4) POWER TOOL USE AND CARE tool is maintained.

  • Page 5: Specific Safety Rules

    SPECIFIC SAFETY RULES F U N C T I O N A L D E S C R I P T I O N INTENDED USE Never operate the tool in an area with flammable solids, liquids, or gases. Sparks This shape beveling and deburring tool is an from the commutator/carbon brushes could electrically driven portable machine:...

  • Page 6: Carton Contents

    UNPACKING when working with this part of the machine. Carefully remove the tool and all loose items from Note: indexable carbide inserts have multiple edges. When one edge is dull simply rotate to the shipping container. the next sharp edge. Once all edges are dull, Retain all packing materials until after you have replace with new inserts.
  • Page 7 remove the rollers and unscrew the wedge nuts from the rollers. Place the wedge nuts in the slots, put the flat washers on the rollers and first screw them in finger tight. Now match the machine to the pipe and adjust the rollers so that they are contacting the outside of the pipe.

  • Page 8: Operation

    Switching the machine on and off OPERATION To switch on: The machine must reach full speed before Press the green ON button to start. beveling/deburring begins. Hold the machine keeping the table plate flat • To switch off: and securely to the workpiece. From the Press the red OFF button to stop.
  • Page 9 WIRING MOTOR 3-WAY CONNECTOR SWITCH BLACK YELLOW BLACK EARTH CAPACITOR...

  • Page 10: Exploded View

    EXPLODED VIEW...

  • Page 11: Parts List

    PARTS LIST Parts Name Q'ty Parts Name Q'ty FRONT HANDLE 3 WIRE PUSH IN CONNECTOR SCREW M14 x 25 CABLE GLAND SB7R-3 BRACKET HEAD COVER CABLE GLAND SB8R-3 SOCKET CAP BOLT M10 x 20 POWER SUPPLY CABLE FLAT WASHER Ø10 x Ø23 x 2 WIRE LEAD DEPTH ADJUSTOR WIRE SHEATH 6mmx15cm...

Table of Contents