Image Settings - Gendex GXS-700 User Manual

Gendex GXS-700 TM

Image Settings

Important: VixWin software does not use GxPicture Optimizer settings described
below. Refer to the VixWin User manual for image settings within
VixWin software.
This dialog allows:
Image Settings
Gamma:
Brightness:
Contrast:
Optimize:
Details:
Intensity:
Noise reduction: Adjusts image graininess. (Default: 38 - Range: 0 to 255)
5-4
• Effective pixel size / bite depth of the image data is
accessible via GxPicture
• Selection of initial values of displayed settings:
Gamma, Brightness, and Contrast
• Activate and configure automatic image optimization.
Adjusts image exposure level. (Default: 1.0 - Range: 0.2 to 2.0)
Adjusts image luminance. (Default: 0 - Range: -50 to 50)
Adjusts image tonal range (pixels of highlights and shadows).
(Default: 100 - Range: 40 to 250)
Advanced imaging filter which enhances quality of an X-ray image
by highlighting morphological details and providing sharpness to
the image (Note: The optimizer settings in VixWin Platinum
overwrites the Optimizer settings in GxPicture). (Default: Off)
Adjusts image sharpness. (Default: 50 - Range: 0 to 255)
Adjusts image intensity. (Default: 45 - Range: 0 to 255)
032-0279-EN Rev 1