Table of Contents
Advertisement
NOTE: Make sure the Battery Door is properly closed to maintain a water tight
seal.
For added protection, the Battery Door can be secured with a secondary lock
(Battery Door Lock Hole) by use of the provided Hex Key .
Test the light's performance by activating the Power/Mode Switch located on
the right hand side of the light.
BT2-IS BATTERY LIFE
MODE
HIGH POWER
LOW POWER
FLASHING
*Battery life may vary according to mode selected, battery quality and prevailing ambient conditions.
OPERATIONAL MODES
HIGH mode: Press the Power/Mode Switch once. From any mode, press
twice (once for OFF and once for ON) to get back to HIGH mode.
LOW mode: From HIGH mode, press and hold the Power/Mode Switch
for 2.5 sec.
FLASHING mode: From LOW mode, press and hold the Power/Mode
Switch for 2.5 sec. To get back to LOW mode, press and hold the Power/
Mode Switch for an additional 2.5 sec.
OFF or to EXIT a mode: Press the Power/Mode Switch once.
NOTE: The light does not retain the mode in memory . Once you turn the light
ON, you will have to reselect the mode you desire.
OTHER FEATURES
NO SLIP GRIP
The Breakthrough
light can be gripped and activated by a user wearing thick gloves.
6
BATTERY LIFE
3 hours
6 hours
12 hours
Series is designed with a reinforced grip handle so that the
®
LUMENS
200
40
200
Advertisement
Table of Contents
