Warranty And Other Information - Foxfury Lighting Solutions Breakthrough series Product Manual

WARRANTY AND OTHER
INFORMATION
PRODUCT DURABILITY
7 M IPX7
Meets requirements of NFPA 1971-
2007 Fire Resistant Requirements:
500° F / 260° C for 30 minutes
CARE/CLEANING
Your FoxFury product is a
professional tool, but regular
maintenance and care of your light
will maximize performance. When
cleaning your FoxFury light, use a
damp soft washcloth, clean water
and a mild soap. Be sure that the
battery compartment is sealed before
washing. When done, pat dry with a
damp cloth. Reapply a silicone based
lubricant onto the o-ring or gasket
of the battery pack at least once
per year as regular maintenance and
after cleaning. This keeps the o-rings
and gaskets pliable and allows them
to maintain the correct seal.
BATTERY PACK
MAINTENANCE
Battery leakage may cause corrosion"
to build in the battery pack contacts,
causing light not to function properly .
In case of presence of corrosion in
the battery pack contacts, please
follow the suggested steps listed
below:
1. Mix 50% vinegar and 50% water.
2. Remove batteries from the battery
pack (battery holder).
3. Use the combination and apply to
the inside of battery pack
8
with soaked cotton swab or cloth. Let
soak for 5 minutes.
4. Clean fluid from inside the battery
pack and dry it properly with a paper
towel, and a blow dryer (make sure
no liquid residue is left inside battery
pack).
5. Replace your batteries and test
the light's function.
6. Repeat as needed.
NOTE: Corrosion from leaking
batteries is not covered by warranty .
AVAILABLE ACCESSORIES
Breakthrough
set of 3, P/N 700-WDG-BL
Breakthrough
set of 3, P/N 700-WDG-YE
WARNINGS
FoxFury, LLC is not responsible for
the incorrect use of any FoxFury
Lighting product.
Lights are strong enough to
cause damage to the human eye.
Do not stare into LEDs for long
periods of time or from a close
range (less than 2 ft).
FoxFury , LLC is not responsible
for any injury or damage caused
during the use of this product.
Substitution of components may
impair intrinsic safety .
To prevent ignition of a
hazardous atmosphere, batteries
must only be changed in an area
known to be nonhazardous.
Wedge Black
®
Wedge Yellow
®