Table of Contents
Advertisement
BATTERY INSTALLATION AND REPLACEMENT
1
4
1.
Turn the Locking Mechanism (located on the Battery Door) counter-
clockwise. Pull the Battery Door straight out, away from the Light Body .
NOTE: The Battery Door will remain attached to the Light Body .
2.
Then, tilt the Light Body up so that the Battery Holder slides out.
3.
Once the Battery Packw is out of the Light Body , flip the Battery Pack
over. Press the Battery Pack Release Button to open it.
Insert four (4) AA batteries into the Battery Pack. Reference the plus ( + )
4.
and minus ( - ) symbols located on the front of the Battery Pack for proper
installation.
REASSEMBLING THE BT
1.
Once batteries are installed, push both halves of the Battery Pack back
together. A 'click' should be heard as the halves become locked together.
2.
Reinsert the Battery Pack into the Light Body . Take note of the Key Way
(groove that the Battery Pack aligns with).
3.
Close the Battery Door and turn the Locking Mechanism clockwise.
2
LOCKING
MECHANISM
*
3
BACK
FRONT
BATTERY
HOLDER
RELEASE
BUTTON
USE HEX KEY
IN BATTERY
DOOR
LOCK HOLE
5
Advertisement
Table of Contents
