Download Print this page

Advertisement

Quick Links

BT2+
BTS
BREAKTHROUGH
BREAKTHROUGH
SERIES
®
380-BT2P-BL | 380-BT2P-OR | 380-BTS-BL | 380-BTS-BY
PRODUCT MANUAL

Advertisement

loading

Summary of Contents for Foxfury Lighting Solutions 380-BTS-BL

  • Page 1 BT2+ BREAKTHROUGH BREAKTHROUGH SERIES ® 380-BT2P-BL | 380-BT2P-OR | 380-BTS-BL | 380-BTS-BY PRODUCT MANUAL...
  • Page 2 BT REFERENCE GUIDE BACK* FRONT POWER/MODE SWITCH D-RING HOLE BEZEL CHARGING PORT STAINLESS STEEL CLIP CHARGE INDICATOR BATTERY DOOR HINGE BATTERY DOOR LOCK HOLE *BT2+ depicted on the left, BTS on the right. BATTERY DOOR ALSO INCLUDED (BOTTOM VIEW) D-RING LOCKING MECHANISM HEX KEY...
  • Page 3: Physical Characteristics

    OVERVIEW From illuminating street addresses, to long range inspections, to locating persons or property , the Breakthrough Series’ focused beams help the user ® see better and respond faster, whether at a long distance or in close quarters. These battery powered lights clip to gear via the Stainless Steel Clip or carabiner for hands-free use.
  • Page 4 BATTERIES The BT Series requires four (4) AA batteries. Acceptable battery types include: Alkaline, rechargeable NiMH or LiFeS (1.2 to 1.6 volts each). DO NOT use Lithium Ion AA batteries (3V , 3.3V or 3.6V) as they will damage the unit and VOID the FoxFury warranty . NOTE: Mixing of new and used, or different brand batteries is not recommended as this could lead to leakage or explosion.
  • Page 5 Insert four (4) AA batteries into the Battery Holder. Reference the plus ( + ) and minus ( - ) symbols located on the front of the Battery Holder for proper installation. REASSEMBLING THE BT Once batteries are installed, push both halves of the Battery Holder back together.
  • Page 6: Operational Modes

    OPERATIONAL MODES HIGH mode: Press the Power/Mode Switch once. From any mode, press twice (once for OFF and once for ON) to get back to HIGH mode. LOW mode: From HIGH mode, press and hold the Power/Mode Switch for 2.5 sec. FLASHING mode: From LOW mode, press and hold the Power/Mode Switch for 2.5 sec.
  • Page 7: Other Features

    OTHER FEATURES NO SLIP GRIP The Breakthrough Series is designed with a reinforced grip handle so that the ® light can be gripped and activated by a user wearing thick gloves. D-RING A D-Ring with key ring is included with all Breakthrough Series lights.
  • Page 8: Warranty And Other Information

    WARRANTY AND OTHER INFORMATION PRODUCT DURABILITY FoxFury , LLC is not responsible for any injury or damage caused during the use of this product. Usage of this product must be IPX7 supervised by an adult when it is Meets requirements of NFPA being used by a minor.
  • Page 9 warranty . This limited warranty is CALIFORNIAPROPOSITION 65 VOID if this Product has been altered This product can expose you to or modified in any way (including but chemicals including Lead and DEHP , not limited to attempted warranty which are known to the State of repair without authorization from California to cause cancer and Foxfury and/or alteration/removal...
  • Page 12 FOXFURY .COM 5/2021...

This manual is also suitable for:

380-bt2p-bl380-bt2p-orBreakthrough series380-bts-byBreakthrough bt2+Breakthrough bts ... Show all