Huawei SmartACU2000B Quick Manual page 20

NOTICE
Connect two optical cables in a ring optical network, and connect one optical cable in a star

optical network.
As optical cables are hard, prepare optical cables before routing them into the cabinet.

Only professionals are allowed to connect optical cables.

5. Connect one end of the optical jumper to the fiber adapter.
6. Route the other end of the optical jumper through the cable hole on the side of the ATB, and
then connect the cable to the ATB.
7. Connect the peripheral optical cable to the ATB, splice the optical cable and the optical jumper,
and then wind the spliced cable around the fiber spool on the ATB.
8. Check that the cables are connected correctly and securely. Then reinstall the optical cable
fastener and ATB cover.
6.6 Connecting the 4G LTE Cable
1. Connect the factory-installed network cable
to the DATA port on the POE module, and
the factory-installed power cable to the POE
module.
2. Connect the CPE network cable to the POE
port on the POE module.
19