Huawei SmartACU2000B Quick Manual page 14

1. Determine the hole positions based on the
marking-off template, and then mark the
hole positions using a marker.
2. Install expansion bolts.
Support-mounted Installation
1. Determine the hole positions
based on the marking-off
template, and then mark the
hole positions using a marker.
2. Drill holes. (You are advised
to apply anti-rust paint on the
hole positions for protection.)
Pole-mounted Installation
NOTE
If you need to pole-mount the smart array controller, prepare a pole mounting bracket based

on the dimensions of the smart array controller. You are advised to use M12 U-shaped bolts to
secure the pole mounting bracket.
 The figure is for reference only. The actual pole and pole mounting bracket prevail.
3. Secure the cabinet.
3. Install bolt assemblies (each
being an expansion bolt with
only a flat washer and a
spring washer).
13
4. Secure the cabinet.