Baracoda RoadRunners Evolution User Manual page 6

BCL LED:
Single Blinks (e.g. *pause*pause*...)
Double fast Blinks (e.g. **pause**pause**...)
The led colour is Green
The Led Colour is Orange
The Led Colour is blinking Orange/Green
RSL LED:
One Single long Blink (green colour)
One Single long Blink (orange colour)
Double fast Blinks Red
One Single long Blink Red + Green (solid)
Green (solid)
Special cases:
Both LEDs blinks orange
Baracoda RoadRunners Evolution – User Guide v1.6
The scanner is ready to be connected
The scanner is connected
The Scanner is set in Real Time mode or in Master mode
The Scanner is set in Batch mode
The Scanner is set in Batch mode, but no barcode is
stored in the memory
The scanner has just read and decoded a barcode
The scanner is set in Master mode and is trying to connect
to the Host address
Battery level is low. Please recharge the battery
immediately
The scanner is charging
The scanner is fully charged
The scanner is set in the "Real Time with No Data Loss
mode" but with no bufferisation (buffer configured to 0)
and is not connected. In this particular situation the
trigger will not activate the beam: impossible to read
barcodes in this mode.
Data Capture
for Workforce
in Motion
- 6 -