Pre-Tensioner Seat Belt - Hyundai EQUUS 2016 Owner's Manual

When fastening the seat belt of the
rear center seat, an occupant should
and ALWAYS use the buckle with the
CENTER mark.
To release the seat belt:
Press the release button (1) on a
buckle. When released, the belt will
automatically retract. When it is not
released, make sure that the belt is
not twisted, and then try again.
Safety system of your vehicle

Pre-tensioner seat belt

OVI035090N
Your vehicle is equipped with driver's
and front passenger's pre-tensioner
seat belts. The purpose of the pre-
tensioner seat belt is to make sure
that a seat belt tightly fits over an
occupant's body in case of a frontal
collision. The pre-tensioner seat
belts will activate in a crash over a
certain scale.
For your safety, make sure that
the belt webbing is not slack or
twisted. Always properly sit in
your seat.
OVI035111N
When the vehicle suddenly stops, or
when an occupant abruptly lean for-
ward, the seat belt retractor locks
into position. In a certain frontal colli-
sion, the pre-tensioner will activate
and fasten the seat belt more tightly
against an occupant's body.
When the pre-tensioner senses an
excessive tension on a seat belt, the
Load Limiter of the pretensioner will
release some of the pressure.
02
OVI035112N
WARNING
2-25