Type A
1. Raise the wiper arm.
NOTICE
Be careful that the wiper arm does
not fall against the windshield. It
may chip off or crack the wind-
shield.
2. Open the cover of the blade. Press
the clip behind the wiper arm and
remove the blade assembly down-
ward.
OVI075165N
3. Install the new blade assembly in
the reverse order.
4. Put the wiper arm back in place on
the windshield.
5. Turn on the ignition switch.
6. Check the wiper operation, and
then turn it off.
Type B
OVI075166N
1. Raise the wiper arm.
NOTICE
Be careful that the wiper arm does
not fall against the windshield. It
may chip off or crack the wind-
shield.
07
Maintenance
OVI075167N
OVI075165N
7-37