Pre-Tensioner Seat Belt - Hyundai i10 Owner's Manual

Safety system
To release your seat belt:
Press the release button (1) in the
locking buckle.
When it is released, the belt should
automatically draw back into the
retractor. If this does not happen,
check the belt to be sure it is not
twisted, then try again.
Rear center seat belt
(if equipped)
When using the rear center seat belt,
the buckle with the "CENTER" mark
must be used.
Information
i
If you are not able to pull out the safety
belt from the retractor, firmly pull the
belt out and release it. After release,
you will be able to pull the belt out
smoothly.
3-24

Pre-tensioner seat belt

(if equipped)
OHI038142 OHI038142
Your vehicle is equipped with driver's
and front passenger's and rear left
side and right side passenger's pre-
tensioner seat belts (Retractor Pre-
tensioner
Fastening Device)).
The purpose of the pre-tensioner is to
make sure the seat belts fit tightly
against the occupant's body in cer-
tain frontal or side collision(s). The
pre-tensioner seat belts may be acti-
vated in crashes where the frontal or
side collision(s) is severe enough,
together with the air bags.
When the vehicle stops suddenly, or
if the occupant tries to lean forward
too quickly, the seat belt retractor will
lock into position.
OAC3039044TU OAC3039044TU
OHI038143L OHI038143L
and EFD (Emergency