Pre-Tensioner Seat Belt - Hyundai Grand i10 NIOS Owner's Manual

Safety System
When using the rear center seat belt, the
buckle with the "CENTER" mark must be
used.
To release the seat belt:
When you want to release the seat
belt, press the button (1) in the locking
buckle.
WARNING
The center lap belt latching mechanism
is different from those for the rear seat
shoulder belts. When fastening the rear
seat shoulder belts or the center lap
belt, make sure they are inserted into
the correct buckles to obtain maximum
protection from the seat belt system
and assure proper operation.
3-20

Pre-tensioner seat belt

(if equipped)
OAI3039015 OAI3039015
Your vehicle is equipped with driver's
and front passenger's pre-tensioner
seat belts (retractor pre-tensioner).The
purpose of the pre-tensioner is to make
sure the seat belts fit tightly against the
occupant's body in certain frontal or
side collision(s). The pre-tensioner seat
belts may be activated in crashes where
the frontal or side collision(s) is severe
enough, together with the airbags.
When the vehicle stops suddenly, or if
the occupant tries to lean forward too
quickly, the seat belt retractor will lock
OHSS038005/H OHSS038005/H
into position. In certain frontal collisions,
the pre-tensioner will activate and pull
the seat belt into tighter contact against
the occupant's body.
For your safety, be sure that the belt
webbing is not loose or twisted and
always sit properly on your seat.
WARNING
OIB034039 OIB034039