Table of Contents
Advertisement
Safety system of your vehicle
WARNING
Do not leave any objects near a
buckle. Placing objects near the
buckle may adversely affect the
buckle
pre-tensioner
increase the injury risk in the
event of a collision.
The seat belt pre-tensioner system
mainly consists of the following com-
ponents.
Their locations are shown in the
above illustration:
1.SRS air bag warning light
2.Retractor pre-tensioner assembly
3.SRS control module
4.Anchor pre-tensioner assembly
WARNING
To obtain maximum benefits
from a pre-tensioner seat belt:
1. The seat belt must be correct-
ly fastened and adjusted to
the proper position.
2-26
(Continued)
Please read and follow all of
the important information and
precautions about your vehi-
cle's occupant safety features
and
– including seat belts and air
bags – that are provided in
this manual.
2. Make sure that you and your
passengers always properly
fasten seat belts.
i
Information
• Both the driver's and front passen-
ger's pre-tensioner seat belts may
activate in a certain frontal/side col-
lision or rollovers.
The pre-tensioner will not activate,
when the seat belt is not fastened at
the time of the collision.
OVI035130N
• When the pre-tensioner seat belt
activates, there will be a loud noise
with fine dust, which may appear to
be smoke and be visible in the pas-
senger compartment.
These are normal, not indicating any
hazard.
• Although it is non-toxic, the fine dust
may cause skin irritation and should
not be inhaled for a prolonged peri-
od of time. Thoroughly Wash all
exposed skin areas after an accident,
in which a pre-tensioner seat belt
activates.
(Continued)
Advertisement
Chapters
Table of Contents
