Briggs & Stratton IS3200ZKAV3561 Dealer Setup & Adjustment Instructions Manual page 22

CAUTION
Do not adjust the spring to be shorter than 2-1/2" (6.4
cm) when compressed. This may damage the brake
mechanism.
7. Turn the adjustment nut (E) to compress or release the
spring.
8. Engage the parking brake and re-measure the spring.
Continue this process until the compressed spring length
measures 2-3/4" (7 cm).
9. Position the set collar 3/8" (0,96 cm) away from the
parking brake bracket and tighten.
If this does not correct the braking problem, see your
dealer.
22 ferrismowers.com