Chapter 4. Assembly And Wash - icetro SSI-141TG User Manual
Small-sized ice cream freezer, it cannot be used in a foreign country where the supply voltage is different, this product is designed for indoor use, make sure to install it indoors, the appearance, design, color, and parts of the product are subject to c
Table of Contents
Advertisement
Chapter 4. Assembly and Wash
Do not disassemble the product, such as the dasher cover, stirrer blade, or drive shaft,
when not all the control switches are turned OFF. Failure to observe this warning can
result in personal injury by moving parts.
In principle, start the machine when it is fully dried, and when operation is over, keep it
dry after disassembling and washing it.
This chapter explains how to assemble parts that have been washed. Make sure to
use fresh mix.
Assembly Step
① Apply grease to the groove at
the end of the shaft. Never apply
grease to the hexagonal end of
the drive shaft.
dasher assy
③ Assembly the dasher cover as
shown in the figure.
12
packing javara
dasher lug pom
Spiral
② Insert the flexible packing until
it fits with the last groove apply
grease inside the flexible
packing.
④ Take care to insert the packing
javara in the correct direction.
Hide quick links:
Advertisement
Table of Contents
