Weidmuller IE-SW-PL06M-2TX-4PoE Hardware Installation Manual page 8

"Turbo Ring" DIP Switch Settings
DIP 1 DIP 2
ON: Enables this
Ethernet Switch
Reserved for
as the Ring
future use.
Master.
"Turbo Ring V2" DIP Switch Settings
DIP 1 DIP 2
ON: Enables the ON: Enables this
default "Ring
Ethernet Switch
Coupling as the Ring
(backup)" port. Master.
OFF: Enables the OFF: This
default "Ring
Ethernet Switch
Coupling will not be the
(primary)" port. Ring Master.
NOTE
You must enable the Turbo Ring function first before using the DIP
switch to activate the Master and Coupler functions.
NOTE
If you do not enable any of the Ethernet switches to be the Ring
Master, the Turbo Ring protocol will automatically choose the
switch with the smallest MAC address range to be the Ring Master.
If you accidentally enable more than one switch to be the Ring
Master, these switches will auto-negotiate to determine which one
will be the Ring Master.
DIP 3 DIP 4
ON: Enables the ON: Activates
default "Ring
DIP switches 1,
Coupling" ports. 2, 3 to configure
"Turbo Ring"
settings.
DIP 3 DIP 4
ON: Enables the ON: Activates
default "Ring
DIP switches 1,
Coupling" port. 2, 3 to configure
"Turbo Ring V2"
settings.
OFF: Do not use OFF: DIP
this Ethernet switches 1, 2, 3
Switch as a ring will be disabled.
coupler.
- 8 -