Clean Ice Chute - Coca-Cola Freestyle Crew Manual

CAUTION:
If there is an ice maker on top of the
Coca-Cola Freestyle dispenser, follow
established procedures for cleaning
the ice bin.
1
Turn off power to the dispenser.
Refer to "Power the Dispenser
On/Off" on page 5 for instructions.
Unplug the unit.
To make sure that no mechanical
parts move during cleaning.
5
Use a clean, sanitized
towel or cloth to wipe the
ice chute body area.
CAUTION:
DO NOT use paper towels.
They may break apart and
clog the ice bin.
WEEkLY TASkS
4
Wash upper and
lower chute with
sanitizing solution.
6 7
Reinstall the upper ice
chute by pushing up and
into the ice chute body
until a click sound is made.
|

CLEAN ICE ChUTE

3 Ice Chute Body
2 Upper Ice Chute
1 Lower Ice Chute
8
Reinstall the lower ice chute
by pushing up and into the
bottom of the upper ice chute
until a click sound is made.
2
Remove the lower chute by carefully
pulling on the front lip of the lower chute.
It should disengage and pull forward.
3
Remove the upper chute by carefully
pulling on the upper lip of the upper chute.
It should disengage and pull forward.
Plug the unit back in to the
electrical outlet.
Turn on power to
the dispenser.
Test to ensure the dispenser
is operating properly.
Refer to "Power the Dispenser On/Off"
on page 5 for instructions.
20