Cleaning And Filling Ice Bin - Coca-Cola freestyle 8000 User Manual

Hide thumbs Also See for freestyle 8000:
Table of Contents

Advertisement

maintenance

cleaning and filling ice bin

How to properly clean the ice bin
Open ice bin lid and empty all ice.
Pour warm water slowly into the bin to melt the
remaining ice.
Remove drain spider. Clean and sanitize drain spider
in an approved sanitizer solution using a clean cloth.
Soak a clean cloth or towel in warm sanitizer solution
and then wipe the insides of the ice bin. Repeat with
fresh sanitizer.
Allow the ice bin to air dry before refilling with ice.
Refill the unit with ice and close lid.
© 2020 The Coca-Cola Company | Coca-Cola Freestyle® 8000 User Guide | Confidential information of The Coca-Cola Company | 20200820
How to check/fill ice
Maintaining the proper ice level is critical to
ensuring guests receive a quality beverage.
Check to ensure ice is at least 1/3 full at all
times. Fill the ice bin by following the steps
illustrated below:
Fill a clean bucket with ice and
slide open ice bin lid.
Dump the ice in the ice bin and
fill until full. (approximately 2"
from the top – do not overfill)
Close ice bin lid. Note: Always
remember to keep the ice bin lid
closed when not in use. This will
help reduce ice melting and
prevent objectives from falling
into the ice bin.
NOTE:
Store bought or "bagged
ice"
SHOULD NEVER BE USED
as it
may seriously damage the Coca-Cola
Freestyle® 8000 dispenser ice bin.
full
2/3 full
1/3 full
Ice bin should NEVER be less
than one-third full
15
|

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents