Cleaning Ice Chute - Coca-Cola FREESTYLE 9000 User Manual

Hide thumbs Also See for FREESTYLE 9000:

Table of Contents

Enlarged version

page 15 | maintenance

cleaning ice chute

How to properly clean the ice chute

Turn off power to the dispenser.

Remove the lower chute by carefully pulling on the front lip of the

lower chute. It should disengage and pull forward.

Remove the upper chute by carefully pulling on the upper lip of the

upper chute. It should disengage and pull forward.

Wash the upper and lower chute and ice chute body area with

approved sanitizing solution (Kay-5).

Soak upper and lower chutes in Kay 5 sanitizing solution for 2 minutes.

Use a clean, sanitized towel or cloth to wipe the ice chute body area.

Reinstall the upper ice chute by pushing up and into the ice chute

body until a click sound is made. When reinstalling the upper ice

chute, ensure the arrow on outside of ice chute is pointing toward the

dispenser and ice opening.

Reinstall the lower ice chute by pushing up and into the bottom of the

upper ice chute until a click sound is made.

Turn on power to the dispenser, allow a few minutes for dispenser to

complete standard start-up procedure and test to ensure the dispenser

is operating properly, i. e., dispense a small amount of ice into a cup.

Table of Contents

Show Quick Links

Table of Contents