Advertisement
Instructions for the user
5.
USE OF THE COOKING HOB
5.1 Lighting the burners
Before lighting the hob burners check that the flame caps are in the
correct position and that their burner caps are in place, making sure that
the holes A in the flame caps correspond to the spark plugs and
thermocouples.
To prevent damage to the work top, the hob comes complete with a
raised pan stand H. This must be placed under pans with a diameter
bigger than those indicated in the table in paragraph "5.3 Pan
diameters". In any case, pans with a diameter greater than 28 cm must
be used solely on the central burner.
The pan stand H can also be used with woks.
A
Each knob corresponds to the burner indicated. The
appliance is equipped with an electric lighting
device. To light the burners, press and turn the knob
anticlockwise to the large flame symbol
knob pressed for about 2 seconds to let the
thermocouple heat up.
If the burner turns off when the knob is released, it means that the
thermocouple isn't hot enough. Repeat ignition and keep the knob
pressed longer.
Once the burner has been ignited, the flame can be regulated as
required.
Always check that the control knobs are in the position
finish using the hob.
If the burners turn off accidentally, a safety device will trip after about 20
seconds to cut off gas flow (even with the gas tap open).
F
G
C
D
H
B
. Keep the
(off) when you
35
Hide quick links:
Advertisement
