Table of Contents
Advertisement
Quick Links
We advise you to read this manual carefully, which contains all the instructions for maintaining the
appliance's aesthetic and functional qualities. For further information on the product: www.smeg.com
These instructions apply only to the destination countries listed on the appliance's data plate.
This is a class 3 built-in hob.
PRECAUTIONS
General safety instructions
Risk of personal injury
• CAUTION: During use the
appliance and its accessible
parts become very hot. Keep
children well away from the
appliance.
• Protect hands with heat resistant
gloves during use.
• Never try to put out a fire or
flames with water: Turn off the
appliance and smother the
flames with a fire blanket or
other appropriate cover.
• This appliance may only be
used by children aged 8 years
and over, and by people of
91477A832/A
3
3
6
7
7
8
Cleaning the hob
8
8
8
8
8
9
9
9
10
10
reduced physical, sensory or
mental capacity, or lacking in
experience in the use of
electrical appliances, provided
that they are supervised or
have been given instructions on
the safe use of the appliance
and of the hazards associated
with it.
• Children must not play with the
appliance.
• Keep children under the age of
eight at a safe distance unless
they are constantly supervised.
• Keep children under the age of
8 away from the appliance
when it is in use.
• Cleaning and maintenance
10
10
10
12
12
12
13
13
13
16
16
17
18
19
PRECAUTIONS - 3
Advertisement
Table of Contents
Related Manuals for Smeg Classica Aesthetic PS906SA2
Summary of Contents for Smeg Classica Aesthetic PS906SA2
-
Page 1: Table Of Contents
We advise you to read this manual carefully, which contains all the instructions for maintaining the appliance’s aesthetic and functional qualities. For further information on the product: www.smeg.com These instructions apply only to the destination countries listed on the appliance's data plate. - Page 2 must not be carried out by • Do not insert pointed metal unsupervised children. objects (cutlery or utensils) into • Make sure that the flame- the slots in the appliance. spreader crowns are correctly • Do not use or store flammable positioned in their housings with materials near the appliance or their respective burner caps.
- Page 3 products in the room where it is objects on the cooking installed. Make sure there is surfaces. good ventilation, especially • DO NOT FOR ANY REASON when the appliance is in use: USE THE APPLIANCE AS A keep the natural ventilation SPACE HEATER.
-
Page 4: Installation
such as the hob pan support personnel. grids, flame-spreader crowns • Have the electrical connection and burner caps in the performed by authorised dishwasher. technical personnel. • This appliance is not designed • Installation using a hose must to operate with external timers be carried out so that the length or with remote-control systems. -
Page 5: Appliance Purpose
compliance with electrical connection. system safety standards. • Fit the power line with an all- • Use cables that can withstand pole circuit breaker with a temperatures of at least 90°C. contact separation distance • Run the power cable in the rear sufficient to provide complete part of the unit. -
Page 6: Manufacturer's Liability
display may differ from those in the manual. Energy efficiency information The information according to the European Manufacturer’s liability ecodesign directive can be found in a separate The manufacturer declines all liability for document together with the product instructions. damage to persons or property caused by: This information can be found in the "Product •... -
Page 7: Description
DESCRIPTION General description models. 1: Left pan support grid • The accessories intended to come into 2: Right pan support grid contact with food are made of materials that 3: Central pan support grid comply with the provisions of current 4: Control panel legislation. -
Page 8: Use
Precautions Using the accessories Raised pan support See General safety instructions. The raised pan supports should be placed on the hob pan supports. Make sure they are A gas leak can cause an explosion. placed properly. If you smell gas or there are faults in the gas system: •... - Page 9 Pan diameters that can be used with the minutes. raised pan support Correct positioning of the flame-spreader Burner Pan diameter (cm) crowns and burner caps 28 - 32 26 - 28 Using cookware Before lighting the hob burners, make sure that the flame-spreader crowns are correctly positioned in their housings with their respective burner caps.
-
Page 10: Cleaning And Maintenance
CLEANING AND MAINTENANCE Cleaning the hob should be cleaned regularly after use. Let them cool first. Cooking hob pan support grids Ordinary daily cleaning Remove the pan support grids and clean them in Always and only use specific products that do lukewarm water and non-abrasive detergent. -
Page 11: What To Do If
What to do if... • Make sure that the hob is properly ventilated and that the air inlets are The hob does not work: unobstructed. • Make sure that the hob is connected and The hob smokes: that the main switch is turned on. •... - Page 12 B.S. 669. Connection to LPG Use a pressure regulator and make the connection on the gas cylinder following the guidelines set out in the standards in force. The supply pressure must comply with the values indicated in the “Burner and nozzle characteristics table”.
- Page 13 issue a certificate of conformity. Replacing nozzles Extraction using a hood Extraction without a hood Extraction with a single natural draught chimney A = External nozzle, B = Internal nozzle. Extraction with a single chimney with 1. Remove the pan supports, burner caps and extractor fan flame-spreader crowns to access the burner Extraction directly outdoors with wall- or...
-
Page 14: Burner And Nozzle Characteristics Table
spindle (depending on the model) until the 5. Repeat the operation on all the gas taps. correct minimum flame is achieved. Adjusting the minimum setting for LPG Tighten the screw located at the side of the cock spindle clockwise all the way. Following adjustment to a gas other than the one originally set in the factory, replace the gas setting label on the... -
Page 15: Section Cut From The Countertop
Fixed connection Appliance overall dimensions (mm) Fit the power line with an all-pole circuit breaker with a contact separation distance sufficient to provide complete disconnection in category III overvoltage conditions, pursuant to installation regulations. For the Australian/New Zealand market: The circuit breaker incorporated in the fixed connection must comply with AS/NZS 3000. -
Page 16: Mounting
Connection positions (mm) 2. Press lightly to make the seal stick to the edge around the hole in the worktop. The front and rear sides of the seal must be flush with the hole. Electrical connection Gas connection Mounting 3. Place the hob on the insulating seal and fix it Over built-in oven unit to the supporting structure using the screws The clearance between the hob and the kitchen... -
Page 17: Instructions For The Installer
base using suitable equipment. contact your local Authorised Service Centre. • Once the appliance has been installed, please explain to the user how to use it correctly. 1 Opens on bottom 2 Opens on back A min. 20 mm - max. 50 mm B max.
Need help?
Do you have a question about the Classica Aesthetic PS906SA2 and is the answer not in the manual?
Questions and answers