Caution And Operation Messages - Sony PXW-Z190V Operating Instructions Manual

Warning indication on
LCD/viewfinder
Clips Near Full
Clips Full
Last Clip Recording
1)
Media(A) Near Full
1)
Media(A) Full
1)
Media(A) Clips Near Full
1)
Media(A) Clips Full
1)
Media(A) Last Clip Rec
1)
"Media(B)" for the card in slot B.

Caution and operation messages

The following caution and operation messages may appear in the center of the screen. Follow the
instructions provided to resolve the issue.
Display message
Battery Error
Please Change Battery
1)
Unknown Media(A)
Please Change
1)
Cannot Use Media(A)
Unsupported File System
Media Error
Media(A) Needs to be Restored
Media Error
Cannot Record to Media(A)
Media Error
1)
Cannot Use Media(A)
1)
Media(A) Error
Recording Halted
Playback Halted
Media Reached Rewriting Limit
1)
Change Media(A)
Warning Recording/
sound tally lamp
Intermittent Flashing
Continuous High-speed
flashing
Intermittent Flashing
Intermittent Flashing
Continuous High-speed
flashing
Intermittent Flashing
Continuous High-speed
flashing
Intermittent Flashing
Cause and Solution
An error was detected in the battery pack.
Replace with a normal battery pack.
A memory card that has been partitioned or a memory card containing
more clips that can be handled by the camcorder was inserted.
The card cannot be used in the camcorder, and must be replaced.
A card using a different file system or an unformatted card was inserted.
The card cannot be used in the camcorder, and must be replaced or
formatted using the camcorder.
An error occurred on the memory card, and the card must be restored.
1) Restore the memory card.
The memory card may be damaged, and can no longer be used for
recording.
1)
Playback may be possible, so making a copy and replacing the memory
card is recommended.
The memory card may be damaged, and can no longer be used for
recording or playback.
The card cannot be used in the camcorder, and must be replaced.
Recording and playback was stopped because an error occurred while
using the memory card.
If the problem persists, replace the memory card.
The memory card has reached the end of its life.
Make a backup, and replace the card immediately. If you continue using
the card, the card may not be able to record or play.
For details, refer to the operating instructions for the memory card.
Cause and Solution
The number of additional clips that can be recorded
on the memory card is getting low.
Replace at the earliest convenience.
The maximum number of clips that can be recorded
on a memory card has been reached.
Recording or copying more clips is not possible.
Replace immediately.
The clip currently recording is the last clip that can
be recorded, as the maximum number of clips has
been reached.
Prepare a new memory card.
When using the Simul Rec function
When using the Simul Rec function
When using the Simul Rec function
When using the Simul Rec function
When using the Simul Rec function
108