Sony PXW-Z190V Operating Instructions Manual page 75

Paint
Item Sub-items and Settings
Knee Setting
On / Off
Knee correction
settings
Auto Knee
On / Off
Point
75% to 109% (90%)
Slope
–99 to +99 (±0)
Knee Saturation
On / Off
Knee Saturation Level
–99 to +99 (±0)
White Clip Setting
On / Off
White clip
adjustment settings
Level
90.0% to 109.0%
Detail(QFHD)
Manual Setting
On / Off
Detail adjustment
settings (QFHD)
Level
–99 to +99 (±0)
Frequency
–99 to +99 (±0)
Knee Aperture
On / Off
Knee Aperture Level
–99 to +99 (±0)
White Limit
–99 to +99 (±0)
Black Limit
–99 to +99 (±0)
V Detail Creation
NAM / Y / G / G+R
Description
Turns the knee correction function on/off.
(Enabled when Gamma >Gamma Category is set to STD)
Turns the auto knee function on/off.
Sets the knee point.
Sets the knee slope.
Enables/disables knee saturation adjustment (adjusts coloring
above the knee point).
Sets the level for adjusting the coloring above the knee point
(knee saturation).
Turns white clipping adjustment function on/off.
Sets the white clip level.
Turns the detail adjustment function on/off.
Sets the detail level.
Sets the center frequency of the detail (detail thickness). The
detail is thinner the higher the center frequency, and thicker
the lower the center frequency.
Turns the knee aperture correction function on/off.
Sets the knee aperture level.
Sets the white-side detail limiter.
Sets the black-side detail limiter.
Sets the signal source for creating the V detail to NAM (G or
R, whichever is higher), Y, G, or G+R.
75