Basic Operations - Sony NW-E7 Service Manual

NW-E7/E10

Basic Operations

Transferring songs from the computer to
Network Walkman (Check-out)
1
Install the supplied OpenMG Jukebox software and import digital audio files to
OpenMG Jukebox.
For details, refer to the OpenMG Jukebox operating instructions.
Note
Before connecting the player to your computer for the first time, be sure to install "OpenMG Jukebox"
software and NW-E7/E10 driver from the supplied CD-ROM to your computer.
If you have already installed "OpenMG Jukebox" software, you also need to install NW-E7/E10 driver before
connecting the player to your computer.
2
Connect Network Walkman to your computer.
1Attach your Network Walkman to the USB cradle.
Note
Be sure to attach the player to the
arrow direction as illustrated below.
USB cradle
3 Connect Network Walkman to your
computer.
Connect the small connector of the supplied
USB cable into the USB jack on the USB
cradle, then the large connector to the USB
jack of your computer.
"PC" appears in the display, and the access
lamp flashes to confirm access to the
computer.
USB cable
(supplied)
to
8
Listening to music with Network
Walkman
Please charge the battery before use (see page 7).
Note
When using Network Walkman, be sure to disconnect it from the computer.
1
Connect the headphones/earphones.
to i jack
2
Start playback.
1 Push the jog lever.
2 Press the VOLUME
+/– button up or
down to adjust
the volume.
HOLD switch
(rear)
10
4
Display
Access lamp
2 Connect the AC power adaptor*.
Connect the supplied AC power adaptor to
an AC wall outlet first, then to the DC IN
jack on the USB cradle.
* You can use the player by only connecting the
dedicated USB cable, but the battery is not be
charged.
USB cradle
to DC IN
to AC
wall outlet
to
AC power adaptor
(supplied)
Playback stops automatically when the music
reaches the end (only when the REPEAT
mode is off).
If playback does not start
The HOLD switch may be switched on. Please
release it off (page 13).
To stop playback
Push the jog lever.
Tip
If you do not operate the player for 3 seconds while
in stop mode, the display automatically turns off.
Notes
• Do not disconnect the USB cable or remove the player from the USB cradle during the access lamp is flashing.
This may cause the data being transferred to be broken.
• Do not connect more than two USB devices to your computer. Normal operation will not be guaranteed.
• Use of this player with a USB hub or a USB extension cable is not guaranteed.
• A malfunction may occur depending on the USB devices connected at any one time.
• When connecting Network Walkman to your computer for the first time, the USB driver Installer window
appears. Please follow the instructions in the Installer window.
• You cannot operate the player while it is connected to a computer.
If you place the player on the USB cradle connected to a computer during playback, playback stops and "PC"
appears on the display.
• Even if you connect the player to a computer, it is impossible to browse the contents of the built-in memory
of the player using the Windows Explorer.
3
Transfer the music file to Network Walkman (Check-out).
For details on how to operate, refer to the OpenMG Jukebox Operating Instructions.
Tip
To transfer the song back to the computer (check-in), refer to the OpenMG Jukebox software instruction
manual or the online help.
Note on playing back time-limited music
(timeout contents)
Some music data distributed via the Internet (EMD service) have playback time restriction.
When you playback a song with playback time restriction, the timeout icon (page 11) goes on.
If you try to playback a song whose playback period is already expired, the timeout icon flashes
and playback of the next song begins.
We recommended you to check-in or delete the expired song in the player to the computer using
the OpenMG Jukebox software.
OpenMG Jukebox will not playback the expired song and the expired song will not be available
for check-out to Network Walkman. Delete these songs as needed.
On other operations
Jog lever Slide
upwards
Push
Slide
downwards
To Operation of
the Jog lever
Go to the beginning Slide upwards once.
of the next track
Go to the beginning Slide upwards
of the succeding and hold still.
tracks
Go to the beginning Slide downwards once.
of the actual track
Go to previous Slide downwards
tracks and hold still.
Go forward While playback, slide up
and hold still.
Go backward While playback, slide
down and hold still.
9
On the display
5
4
BASS12
3
6
SHUF
2
1
VOL
1
1 Play/Volume indicators
While playing, the N icon and the song
number appear.
While changing the volume, VOL and the
volume level appear.
2 Play back mode indication (page 13)
The selected repeat mode is displayed.
3 MEGA BASS indication (page 12)
The indication lights up while the MEGA
BASS function is activated.
4 AVLS indication (page 12)
The indication lights up while the AVLS
function is activated.
5 Battery remain indication (page 7)
The remaining battery power is
displayed.
6 Timeout icon
Depending on the time-limited rights
associated with certain music content, the
playback period may expire. (The icon
appears when you play back a timeout
content. The icon flashes if the playback
period has expired.)
11